Auto Lamp Mould

Auto Lamp Mould

One: Product design and 3D mold design

Mold structure design is the prerequisite for making a qualified mold. The professional technicians of our company will conduct a comprehensive analysis of the product and mold structure, including:

1). Whether the position of the parting surface and the finishing precision meet the requirements, whether there will be flashing, whether the plastic parts can be guaranteed to stay on the side of the mold with the ejector device after the mold is opened.

2). Whether the demolding method is correct, whether the size, position, and quantity of the promotion rod and push tube are appropriate, whether the push plate will be stuck by the core, and will it cause scratches on the molded parts.

3). Regarding mold temperature adjustment. The power and quantity of the heater; whether the location, size and quantity of the flow line of the cooling medium are appropriate.

4). The method of processing the undercut of plastic parts and whether the mechanism for removing the undercut is appropriate, such as whether the slider and the push rod in the inclined guide column core pulling mechanism interfere with each other.